The steel dam gate designed and manufactured by Jiangsu Fangyang Machinery and Electrical Equipment Co., Ltd. is a novel, beautiful and practical type of gate. When it is in operation, the gate can be lifted to store water, and the gate can be lowered to allow flood. When retaining water, the water level can be adjusted by adjusting the opening angle appropriately. At the same time, the top of the gate can overflow and form the landscape effect of artificial waterfall.
The gate is made of steel, and the surface is treated with hot spraying zinc corrosion protection, which is durable and durable. Running parts are made of special composite materials, and no lubricant is needed for underwater operation. The gate is opened and closed by hydraulic equipment, which is fast and can be completed in a few minutes. The special locking device can effectively control the opening angle of the gate, and the water level can be adjusted arbitrarily.
The steel dam gate is suitable for the condition of wider gate hole (1 M-60 m) and smaller water level difference (1-5 m). Because it can be designed broadly and several piers can be saved, it is not only simple in structure, but also can save a lot of civil investment.
Because the hoist is arranged in the hoisting rooms on both sides, there is no traditional bent and working bridge on the upper part of the gate, which can fully meet the requirements of the landscape and save civil engineering.
The steel dam gate mainly consists of three parts:
The main movable part is used to close or open the orifice, commonly known as the gate, also known as the door leaf.
(2) buried part;
(3) Hoisting and closing equipment.
CHARACTERISTICS OF STEEL DAM
It has simple structure and beautiful appearance. Easy to open and close, flexible operation. Civil construction is small in volume, long in service life and will not silt up.
